Low-voltage, energy-efficient wipe warmer with soft night light. Flip top lid allows easy access to wipes. Night light features 10-minute auto shut-off. Holds up to 100 standard sized baby wipes (wipes not included).

Place Warm Glow Wipe Warmer on a flat, stable and suitable surface. Slide locks (located on each side of the warmer) forward, and lift the main lid. Remove “Pop-Up” wipes or “Original/Standard” wipes from their original package, and insert into warmer. If “Pop-Up” wipes are used, push top wipe up through the opening under the smaller lid. Close both lids, and slide locks back into locked position. Be sure smaller lid is also closed securely. Do not over-fill with wipes. Both lids should be able to completely close. To access a “Pop-Up” wipe, open smaller lid and pull. To access an “Original/ Standard” wipe, unlock and open main lid. Be sure to slide locks back into place when finished. (Please note, the use of “Pop-Up” wipes is preferred. To use “Original/Standard” wipes, you must open the main lid each time a wipe is needed, which may contribute to the drying of wipes.) To turn on the light, push the illuminated button (the power indicator) in the front of the warmer. Push the button again to turn off. If the light is left on, it will automatically shut off after 10 minutes. Use only with a Class 2 Adapter. Model YU120085A2 or FL-41120830A. Plug transformer into a standard household 110-120 volt AC outlet. Do not plug into a 220 volt AC outlet. The power indicator will be on when functioning properly and the unit will begin warming. Unit is intended to keep wipes warm for comfortable diaper changes. Wipes are not intended to reach a “HOT” temperature. Use all baby wipes in accordance with specific manufacturer's directions. To preserve wipes and energy, unplug unit during prolonged periods of non-use. Cleaning and Care: Always unplug unit from power source and ensure that it is cool before cleaning. Remove wipes and wipe unit clean with a non-abrasive cloth.When adding new wipes to the Warm Glow Wipe Warmer, pour up to ½ cup of water over the top of the wipes. If wipes need additional moisture, pour up to ½ cup of water over the top of the wipes. In rare cases, wipes may become discolored due to prolonged exposure to heat. Remember to unplug your warmer if not planning to use for prolonged periods of time. Do not immerse in water.
Warnings
STRANGULATION HAZARD! - Keep out of reach of children. Do not use with extension cords. This is not a toy, adult use only. Caution: • This product is not a toy, for adult use only. • Product should be used for intended purpose only - to warm wipes. Do not use unit to warm any other objects. • For household use only. Do not use outdoors. • Keep out of reach of children. • Do not use in an oxygen-enriched environment or near equipment that stores or emits oxygen. • Do not use the power cord as a handle. Never pull on the supply cord. • Arrange power cord to minimize the possibility of accidents. • Do not cover with blankets or any type of insulating material. • Discontinue use if any signs of deterioration appear on the unit or on the supply cord. • Do not immerse cord, plug or warmer in water or any other liquid. • Do not tamper with warmer in any way. If for any reason the unit fails to function properly, immediately return it to Munchkin, Inc. if within the warranty period. • Unplug when not in constant use. • Because of the continuous low levels of heat and moisture associated with the warmer, unit must be placed on a compatible surface (wood and painted surfaces are not recommended). Munchkin, Inc. makes no warranty that surface discoloration or damage may not occur due to heat or moisture. • This product is not intended for use by children and persons with limited physical and mental capabilities unless they have been instructed or supervised on the proper use of this product by a person responsible for their safety