●Original, gentle formula ●Gently cleans, rinses, disinfects, and stores your soft contact lenses ● Contains Dymed and poloxamine for clean, comfortable lenses

Directions: complete these simple steps: STEP 1: Place 3 drops of sensitive eyes multi-purpose solution on each side of the lens and gently rub for at least 20 seconds. STEP 2: Thoroughly rinse each side of the lens. STEP 3: Place cleaned contact lens in the lens case and fill with fresh sensitive eyes multi-purpose solution. Soak at least four (4) hours.

Warnings
Always follow the product directions for use. Failure to follow product directions may lead to vision loss. • If you are allergic to any ingredient in this product, do not use. • Keep the bottle tightly closed when not in use. • Use before expiration date marked on the carton and bottle. • Discard remaining solution within 90 days after opening. • Empty, then clean and rinse your lens case with sensitive eyes multi-purpose solution. Air dry your lens case each time you remove your lenses. In order to permit excess solution to drain, you can flip over your lens case while air drying. • Keep out of reach of children. • Store at room temperature (15-30°C). • Do not mix with other fluids, except as directed. Contact lens solutions are not interchangeable. • Never instill eye drops or solutions not intended for use with contact lenses. • Do not use any eye medication in conjunction with this solution except under medical supervision. • If you experience any irritation, eye discomfort, excessive tear production, vision changes or redness of the eye, remove your lenses, discontinue use of this product and consult your eye care professional. • Solution is sterile until opened. Do not touch the bottle tip to any surface since this may cause contamination. • Do not wear your soft contact lenses when working in the presence of harmful or irritating vapour or fumes. • Do not allow soaps, cosmetics or other chemical substances to come in contact with your lenses. • Do not use eye make-up in the inner margin of the eyelids as small particles could be transferred onto the surface of your lens. • Not for use with heat (thermal) disinfection.

Active ingredients: DYMED® (polyaminopropyl biguanide) 0.00005% and Edetate Disodium 0.10%. Non-medicinal ingredients: boric acid, Poloxamine 1107, purified water, sodium borate, sodium chloride. May contain hydrochloric acid or sodium hydroxide to adjust pH.